尊龙集团

about_ban

contact_list

    Addr:Xinglong Industrial Zone, Yangzhong City, Jiangsu Province
    Tel: 13852950345
    E-mail:sandy@hansasealant.com

This Week\'s Market Updates

Publisher:Hansa seal Pubtime:2026-11-16 13:57:00 Close

Market Trend Update (Nov 9 – Nov 15)

1. Nylon & Polyoxymethylene: PA6 led the decline, POM softened weakly

PA6 chips tumbled sharply last week, with the benchmark price dropping from approximately RMB 15,033/ton two weeks ago to RMB 13,433/ton, a week-on-week decrease of 10.64%. Multiple raw material suppliers cut ex-factory prices synchronously on November 10. Upstream caprolactam also trended downward during the week; Sinopec’s caprolactam settlement price for the first week of November stood at around RMB 13,146/ton. Downstream weaving and modification plants remained cautious on procurement, only placing small orders for immediate demand. PA6 is expected to stay in weak oscillation in the short term.

POM (polyoxymethylene) consolidated weakly this week. Domestic grades were mainly quoted at RMB 9,000–9,300/ton, while Yankuang Lunan M270 fell as low as RMB 8,500/ton. Imported grades were offered at RMB 10,800–11,200/ton, edging down slightly from two weeks ago with a smaller decline than PA6.

2. Polyethylene & UHMWPE: Significant downward pressure from costs

LDPE and LLDPE prices have kept falling since early November, down 8.53% and 7.46% respectively from the start of the month, currently quoted at RMB 11,433/ton and RMB 9,508/ton. Sliding international crude oil and sharp drops in naphtha greatly weakened cost support. Demand for agricultural film and packaging film is in the traditional off-season, and manufacturers face mounting inventory pressure. UHMWPE (ultra-high molecular weight polyethylene) trended slightly weaker alongside the polyethylene sector.

3. Fluoropolymers: PTFE, PFA and FEP remained stable

In sharp contrast to the broad decline of general plastics, fluoropolymer prices stayed largely flat last week. The trade-side benchmark reference price for PTFE suspension resin held steady at RMB 31,800/ton (note: this is the circulating quotation from traders; major manufacturers such as Dongyue and Juhua offer higher mainstream ex-factory prices with wide price gaps). Raw material suppliers maintained stable quotations with no obvious fluctuations within 30 days.

Domestic and agency-sourced general-grade PFA pellets were quoted at roughly RMB 160–220/kg (RMB 160,000–220,000/ton). High-purity imported semiconductor grades such as Daikin AP-231SH remained firm at the high level of RMB 450–550/kg. For FEP, extrusion/molding pellets were offered at about RMB 68/kg with no price adjustment last week.

Benefiting from highly concentrated supply and relatively rigid downstream demand in semiconductors, photovoltaics and anti-corrosion sealing sectors, fluoropolymers show much stronger resistance to price drops than general plastics.

4. PEEK & PU: High-performance specialty materials firm, polyurethane cost eased

PEEK (polyetheretherketone), a specialty engineering plastic used in aerospace, medical devices and semiconductors, kept firm at high levels for both domestic pellets and imported sheets last week. Domestic neat resin pellets were mainly quoted at RMB 260–350/kg, while imported grades carried higher prices with no weekly changes.

The PU (polyurethane) industrial chain softened along with falling crude oil. Cost support for pure MDI, TDI and flexible foam polyether weakened. Downstream demand from furniture and automotive interiors remained sluggish, and the market consolidated weakly overall.

 

Forecast for Nov 16 – Nov 22

1. General & Engineering Plastics: Slower declines, no rebound expected

After PA6 plunged 10.64% last week, Business Monitor judged caprolactam to be oscillation-biased bearish on Nov 16 with limited room for further falls. Following the rapid correction, some polymerization plants are facing heavy losses and may reduce operating rates to mitigate risks next week, which will offer certain price support and restrict deep drops. Nevertheless, the loose supply pattern of caprolactam will persist, and downstream demand from weaving and modification has yet to recover. PA6 is projected to trade mainly within RMB 12,900–13,600/ton in weak oscillation; a minor technical bounce cannot be ruled out.

For LDPE and LLDPE, surveys show around 60% of market participants expect stable prices this week, while 40% anticipate another mild drop of RMB 50–100/ton. LLDPE in November has generally followed a pattern of “rising first then falling with a lower price center”, with East China mainstream prices ranging RMB 9,400–11,000/ton.

POM faces further weakened cost support as methanol prices fell nearly 10%, coupled with inventory accumulation at producers. Domestic grades are forecast to consolidate weakly at RMB 8,800–9,300/ton.

2. Fluoropolymers & Specialty Materials: Remain steady

PTFE, PFA and FEP are expected to stay stable this week with narrow price swings, backed by concentrated domestic supply, relatively rigid downstream demand from semiconductors, photovoltaics and anti-corrosion sealing, and strong price-holding willingness from major manufacturers. PEEK, the specialty engineering plastic for aerospace and medical applications, will remain firm at high levels with no near-term price adjustment signals. UHMWPE will trend slightly weaker following the polyethylene sector.

 

This article is for reference and exchange only.

本文起源网络,仅供分享互换,不作贸易用处,版权归原作者和原作者出处。若有侵权,请联系删除。
Product
PTFE PRODUCTS
NYLON PRODUCTS
PEEK PRODUCTS
PE PRODUCTS
POM PRODUCTS
OTHER PLASTIC PRODUCTS
SEALING ELEMENT
PVC
About Us
Company profile
corporate culture
Enterprise honor
News Center
Company news
Industry news
Contact Us
Addr:Xinglong Industrial Zone, Yangzhong City, Jiangsu Province
Tel:13852950345
Email:sandy@hansasealant.com
erweima
【网站地图】